Posts Tagged Stress
Stressed!!!
Posted by Wasim in Autodesk FEA Simulation on June 23, 2011
Are you using Inventor Simulation? Do you need help on Inventor Simulation? Do you want to share and help like-minded professional? If the answer is YES then you can join the only FREE dedicated support forum on Linked In. To joint the forum click on the following link http://www.linkedin.com/groups?gid=2061026&trk=hb_side_g Any problems then send me an email younis_wasim@hotmail.com with [...]
What is the difference between remote force and force?
Posted by Wasim in Autodesk FEA Simulation, FEA-Tips on June 22, 2011
The difference between remote force and force is that it allows the ability to define the location of the force (and not predetermined by selecting the faces of geometry like the force command), as illustrated below Another key difference between remote force and force is that remote force also induces moment/torque as soon as remote point [...]
Inventor Frame Analysis or Stress Analysis! – Some Pro’s and Con’s
Posted by Wasim in FEA, FEA-Tips, Frame Analysis on April 23, 2010
With the release of Autodesk Inventor Simulation 2011 comes frame analysis in addition to stress analysis. So the question, for some maybe, is which one to use. Well if a component or indeed an assembly comprises of a uniform cross-section along its entire length and the ratio of length/cross-section is greater than 10 then use [...]
Whats NEW in Autodesk Inventor Simulation 2011
Posted by Wasim in Frame Analysis on April 7, 2010
Now with Inventor Simulation 2011 you can perform Stress and Modal Analysis on structures designed using Content Centre and Frame Generator. When Frame Analysis is activated from within Assembly environment the frame structure of the assembly are automatically converted into beam elements with all the associated properties collected from the content centre. Any gaps between [...]
Connect with Wasim on
